The DisplayPort connector can have one, two, or four differential data pairs (lanes) in a Main Link, each with a raw bit rate of 1.62, 2.7, 5.4, or 8.1 Gbit/s per lane with self-clock running at 162, 270, 540, or 810 MHz. VGA adapters are powered by the DisplayPort connector, while dual-link DVI adapters may rely on an external power source (see Dual-mode). Analog VGA and dual-link DVI require powered active adapters to convert the protocol and signal levels and do not rely on Dual-Mode.

However, Dual-mode DisplayPorts are designed to transmit a single-link DVI or HDMI 1.2/1.4 TMDS protocol across the interface through the use of an external passive adapter that selects the desired signal and converts it from 3.3 volts to 5 volts. The DisplayPort LVDS signal protocol is not compatible with DVI or HDMI. In addition, the interface is capable of carrying bi-directional USB signals. A bi-directional, half-duplex auxiliary channel carries device management and device control data for the Main Link, such as VESA EDID, MCCS, and DPMS standards. The video signal path can have six to sixteen bits per color channel, and the audio path can have up to eight channels of 24-bit 192 kHz uncompressed PCM audio or can encapsulate compressed audio formats in the audio stream. The use of data packets also allows DisplayPort to be extensible, meaning additional features can be added over time without significant changes to the physical interface itself.ĭisplayPort can be used to transmit audio and video simultaneously, but each one is optional and can be transmitted without the other.

It allows both internal and external display connections and, unlike legacy standards where differential pairs are fixed to transmitting a clock signal with each output, the DisplayPort protocol is based on small data packets known as micro packets, which can embed the clock signal within the data stream, allowing higher resolutions with fewer pins. DisplayPort is backwards compatible with VGA, DVI and HDMI through the use of passive and active adapters.ĭisplayPort is the first display interface to rely on packetized data transmission, a form of digital communication found in technologies including Ethernet, USB, and PCI Express. VESA designed it to replace VGA, DVI, and FPD-Link. The interface is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to carry audio, USB, and other forms of data. Guide work perfectly on my computer.DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA).

Display port driver windows 10